Showing result: 1 - 10 of 380
-
Fluid-Structure Interaction
This is a model exemplifying how fluid-structure interactions can be modeled using COMSOL Multiphysics. Viscous forces and the system’s pressure impose forces to the surface of a structure. The deformation in the soft structure is not small and the fluid regime will therefore dynamically change. T...
Read more about this model -
Cooling and Solidification
In this model, continuous casting processing of a metal rod from melted to solid state is modeled.
The model describes the fluid and solid flow and heat transport, including the phase transfer from melt to solid. This phase change causes momentum changes, latent heat release and a variation in ph...
Read more about this model -
Blood Vessel
This model refers to a portion of the vascular system of a young child - the upper part of the aorta artery. The blood vessels are embedded in a biological tissue (the cardiac muscle) and, during the flow of blood, pressure is applied to the internal surfaces producing deformation of the vessel wall...
Read more about this model -
Filling of a Capillary Channel
This example studies a narrow vertical cylinder placed on top of a reservoir filled with water. Because of wall adhesion and surface tension at the air/water interface, water rises through the channel.
Surface tension and wall adhesive forces are often used to transport fluid through microchannel...
Read more about this model -
Absorbed Radiation (SAR value) in a Human Head
The increasing use of wireless equipment has also increased the amount of radiation energy to which human bodies are exposed. A common property that measures absorbed energy is the SAR value, (specific absorption rate) to determine the amount of radiation that human tissue absorbs.
The human head...
Read more about this model -
Piezo-Acoustic Transducer
People that use piezoelectric transducers are interested in phased-array microphone, ultrasound equipment, ink-jet drop actuators, drug discovery, Sonar transducers, bio-imaging and acousto-bio-theraputics. Basically anyone who is trying to create sound in air or liquids turns to a version of this p...
Read more about this model -
Droplet Breakup in a T-junction
Emulsions consist of small liquid droplets immersed in an immiscible liquid and widely occur in the production of food, cosmetics, fine chemicals, and pharmaceutical products. The quality of the product is typically dependent on the size of the droplets. Simulating these processes can help in optimi...
Read more about this model -
Inkjet
This example demonstrates how to model the fluid flow from an inkjet, for instance, within an inkjet printer. An ink droplet is ejected through a nozzle and travels through air until it hits the target.
A conservative level set method is used to track the interface between air and ink. The fluid...
Read more about this model -
Shell-and-Tube Heat Exchanger
In this model, you will study a part of a shell-and-tube heat exchanger, where hot water enters from above. The cooling medium flows through the tubes that, in this model, impose a constant temperature at the walls. Furthermore, the tubes are assumed to be made of stainless steel and the heat flux i...
Read more about this model -
Balanced Patch Antenna for 6 GHz
Patch antennas are compact and easy to fabricate. The layout of the patch and the properties of the printed circuit board determine the radiation pattern.
This model is a full 3D simulation of a patch antenna. It finds the optimum radiation frequency, antenna impedance, and radiation pattern. It...
Read more about this model