Fracture-Matrix Flow Partitioning and Cross Flow: Numerical Modeling of Laboratory Fractured Core Flood
R. Sanaee, G.F. Oluyemi, M. Hossain, B.M. Oyeneyin
Robert Gordon University, Aberdeen, United Kingdom
The contrast between hydro-mechanical behavior of the rock matrix and fracture network systems results in flow partitioning between fracture and matrix systems which is affected by the In-situ stress regime. Fracture flow, Darcy law and free and porous media flow physics interfaces of COMSOL were used in simulating a fractured core flooding test to achieve a better understanding of flow ...
Geometric Modeling and Numerical Simulation of Airfoil Shapes Using Integrated MATLAB® and COMSOL Multiphysics
A. Safari, H. Lemu G., H. Severson
University of Stavanger, Stavanger, Norway
This paper proposes a framework for an efficient integration between geometric modeling program and analysis tool for a coming automated aerodynamic design optimization mission. This demand can be addressed by using both in-house codes and commercial software which have the good ability of live-link and efficient integration. In this study, the mathematical modeling of a turbomachinery airfoil ...
A Theoretical Model for the Control of Color Degradation and Microbial Spoilage Occurring in Food Convective Drying
S. Curcio, M. Aversa
University of Calabria, Department of Engineering Modeling, Rende, Cosenza, Italy
The aim of this work was the development of a predictive model aimed at identifying a proper control strategy of food drying process. In particular, it was intended to determine the effect of operating conditions both on the color degradation, chosen as a reference quality parameter, and on the microbial spoilage occurring during potatoes drying. A transport model, accounting for the ...
D. Iber, D. Menshykau
D-BSSE, ETH Zurich, Basel, Switzerland
Organogenesis is a tightly regulated process that has been studied experimentally for decades. We are developing mechanistic models for the morphogenesis of limbs, lungs, and kidneys with a view to integrate available knowledge and to better understand the underlying regulatory logic. Organ size changes dramatically during development, and tissues are composed of several layers that may expand ...
F. De Vita, S. Di Marco, F. Costa, P. Turchi
Altran Italia, Pisa, Italy
This paper will describe some applications of COMSOL Multiphysics to the analysis of Frequency Selective Surface (FSS) structures. Particular attention will be devoted to the possibility of designing a stealthy antenna using the FSS structure. In fact, since it possesses a dual filter concept of frequency and polarization for electromagnetic wave, the Radar Cross Section (RCS) of the antenna is ...
Utilization of COMSOL Multiphysics' JAVA API for the Implementation of a Micromagnetic Modeling and Simulation Package with a Customized User Interface
L. Teich, A. Hütten, C. Schröder
Department of Engineering Sciences and Mathematics, Computational Materials Science & Engineering (CMSE), University of Applied Sciences Bielefeld, Bielefeld, Germany
Department of Physics, Thin Films and Nanostructures, Bielefeld University, Bielefeld, Germany
One of the big advantages of COMSOL Multiphysics is the possibility to implement user-defined partial differential equations (PDE) which can be coupled to COMSOL\'s predefined physics interfaces. However, using the tool’s standard user interface requires manual implementation of the PDEs and a multitude of problem-specific parameters. This process is not just error-prone but also very time ...
E. Licon, S. Casas, A. Alcaraz, J.L. Cortina, C. Valderrama
Universitat Politécnica de Catalunya, Barcelona, Spain
Ammonia separation from water by membrane contactor was simulated on transient state and compared with experimental data. Aqueous low concentrated solution of ammonium with high pH has been pumped inside the hydrophobic hollow fibers, acid solution in the outside part. The system is in closed loop configuration. In order to simulate the separation process, equations were developed considering ...
S. Carcangiu, B. Cannas, G. Concu, N. Trulli
Department of Electric and Electronic Engineering, University of Cagliari, Cagliari, Italy
Department of Civil Engineering, Environmental and Architecture, University of Cagliari, Cagliari, Italy
Department of Architecture and Planning, University of Sassari, Alghero, Italy
An experimental program has been developed, with the purpose of evaluating the reliability in building diagnosis and characterization of an integrated analysis of several parameters related to heat transfer process through the building material. The Infrared Thermography Technique (IRT) has been applied. Experimental measurements have been carried out on a concrete structure with an inside ...
F. Messina, M. Icardi, D. Machisio, R. Sethi
Politecnico di Torino - DIATI, Torino, Italy
Politecnico di Torino - DISAT, Torino, Italy
Nanoscale zerovalent iron is a promising reagent for the remediation of contaminated groundwater. The aim of the study is to simulate the transport of iron nanoparticles and their interaction with the porous media, their attachment and deposition on the soil grains. The particles trajectories is determined by several forces, some of them are significance only close to grains surfaces where, ...
Keyhole Formation During Spot Laser Welding: Heat and Fluid Flow Modeling in a 2D Axisymmetric Configuration
M. Courtois, M. Carin, P. LeMasson, S. Gaied 
ArcelorMittal, Global R&D, Montataire, France
LIMATB Laboratory, Université de Bretagne Sud, Lorient, France
For a better understanding of phenomena associated to the appearance of defects in laser welding, a heat and fluid flow model is developed. This study is focused on the modeling of a static laser shot on a sample of steel. This 2D axialsymmetric configuration is used to study phenomena related to the creation of the keyhole. This model takes into account the three phases of the matter: the ...