M. Kavasoglu, R. Haettel, and C.H. Ploetner
ABB Corporate Research, Västerås, Sweden
ABB Transformers, Varennes, Canada
Transformers, as any other industrial products, have to comply with various requirements on noise levels. Three main sources of noise can be identified in transformers: no-load noise or core noise generated by magnetostriction in the core steel laminations, load noise produced by electromagnetic forces in the windings and noise due to auxiliary equipment such as fans and pumps used in the cooling ...
B.A. Wols[1,2], J.A.M.H. Hofman[1,2], W.S.J. Uijttewaal, and J.C. van Dijk
KWR Watercycle Research Institute, Nieuwegein, The Netherlands
Delft University of Technology, Niewegein, The Netherlands
Disinfection of drinking water is required to prevent the outbreak of water-borne diseases. Different treatment steps are available to disinfect the water, such as chlorination, ozonation or UV irradiation. The hydrodynamics of these processes play an important role in their performance. COMSOL Multiphysics was used to simulate the water flow in disinfection installations. Moreover, a particle ...
G. Maizza, and R. Cagliero
Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
Instrumented indentation is increasingly used as an alternative non-destructive test method to measure mechanical properties of small volumes of materials. In this work, the instrumented indentation test is applied as a non-destructive method to assess the mechanical properties of TiAl components during the setup of a real production process. This study is a preliminary contribution devoted to ...
A. Heidsieck, and B. Gleich
Zentralinstitut für Medizintechnik, TU München, München, Germany
The technique of magnetic drug targeting binds genetic material or drugs to superparamagnetic nanoparticles and accumulates them via an external magnetic field in a target region. However, it is still a challenge for this approach to succeed in areas with high flow rates, like the aorta or the heart ventricle. The magnetic field sources have to be accurately optimized and adapted to the local ...
E. Holzbecher, W.L. Wah, and M-S. Litz
Georg-August Universität Göttingen, Germany
Freie Universität Berlin, Germany
There are various alternative options concerning modeling fluid flow within fractures in porous media. We give a general overview, with remarks concerning the modeling using COMSOL Multiphysics. Moreover we define and study two test cases for intercomparison. Finally for one of the testcases some results of an extensive sensitivity study is presented.
Y. Pennec, Y. El Hassouani, C. Li, B.D. Rouhani, E.H. El Boudouti, H. Larabi, and A. Akjouj
Institut d’Electronique, de Microélectronique et de Nanotechnologie, Université de Lille, Villeneuve d’Ascq, France
Phononic crystals are a class of materials that exhibit periodic variations in their density and elastic properties. Such crystals modify the propagation of acoustic waves and prohibit the propagation of sound for frequencies within the band gap. We discuss the simultaneous existence of phononic and photonic band gaps in a periodic array of silicon pillars deposited on a homogeneous SiO2 ...
A. Methlouthi, O. Rouaud, and L. Boillereaux
Industrial microwave ovens are widely used in agri-food and chemical applications. Resonant cavities are used to speed up chemical reactions and have the advantage to be small sized and efficient in terms of microwave distribution. These multimode cavities are considered as batch ovens where a small amount of products is treated. Rotating plates are added in the cavities to ensure a homogeneous ...
P-O. Johansson, and J. Wollerstrand
Lund University, Lund, Sweden
In a hydronic space heating system the heat output arises from natural convection and radiation from the radiators. In order to increase the heat output, without replacing the radiators with larger ones, or increasing the temperature level, the radiator can be equipped with add-onfan blowers. In the latter case, the heat output from the radiator will increase due to increased convection. This ...
F. Mercier, D. Chaussende, J.M. Dedulle[1,2] and J. Lefebure
Laboratoire des Matériaux et du Génie Physique (LMGP), Grenoble INP - CNRS, France
IRIS Technologies, Grenoble, France
Despite its real advantages compare to seeded sublimation growth, SiC solution growth has never given convincing results. The difficulty of stabilizing the growth front, and thus avoiding any polycrystal formation results from a poor description and understanding of the coupled phenomena that occur in the crucible. This paper addresses the coupled electromagnetism, heat transfer and fluid dynamic ...
A. Shoory, A. Smorgonskiy, and F. Vega
Electromagnetic Compatibility (EMC) group, Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland
In this paper, we will present simulation results obtained using COMSOL RF module for the current along a wire antenna in both frequency and time domains. The structure is excited through a lumped (voltage or current) source at its center. For the frequency domain simulations we compare the results with the Numerical Electromagnetics Code (NEC-4) and for the time domain results we compare them ...