P. Bonfiglio, and A. Farnetani
Università degli Studi di Ferrara
The main object of this paper is the determination of the impulse response, in the low frequency range, for calculating the reverberation time and the energetic parameters in this space. An absorbing material is modelled by using the propagation of sound waves in an equivalent fluid. The results of this Finite Element model are compared with experimental measurements of impulse responses ...
S. Vaccaro, G. Ferrazzano, and P. Ciambelli
Università di Salerno
Mathematical modelling of a catalytic plate reactor for methane steam reforming with COMSOL Multiphysics was carried out. The model reactor includes three channels where methane combustion occurs on the plates bordering the inner side of the outermost channels, whereas methane steam reforming takes place on the plates bordering the central channel.
Laboratori Nazionali di Legnaro
A two dimensional description of plasma charged sheath and ion extraction, including the complete plasma sheath equation, is proposed and reduced to a system of coupled fields, implemented with use of COMSOL Multiphysics. A separate application of the weak form to the Hamilton-Jacobi and Poisson equations is also described, using five coupled fields.
University of Calabria
The aim of the present work is the formulation of a theoretical model describing the transport phenomena involved in a food drying process by a convective oven. The proposed model represents a general and predictive tool capable of describing the real oven’s behavior over a wide range of process and fluid-dynamic conditions. The resulting system of non-linear unsteady-state partial ...
L. Martinelli, and P. Ruol
 Università di Bologna
 IMAGE, Università di Padova
This paper describes an example of full fluid structure interaction. The 2D dynamics of a box-type pile-anchored floating breakwater is solved by means of two models using COMSOL Multiphysics . Simulated wave transmission and vertical displacements of the floating breakwater agree well with physical model results.
C. Boffo, C. Cooper, G. Galasso, and A. Rowe
 FNAL, Batavia, IL 60510, U.S.A.
 Università degli Studi di Udine
Buffer chemical polishing is a cheap, simple and effective processing technique for single grain high gradient and polycrystalline lower gradient cavities. This paper describes the thermal-fluid finite element model adopted to simulate the process, the experimental flow visualization tests performed to verify the simulation and a novel device fabricated to solve the problem.
F. Rossi, R. Pini, and L. Menabuoni
 Istituto di Fisica Applicata, CNR, Firenze
 U.O. Oculistica, Prato
3D model analysis of the temperature dynamics during a welding process is presented. Bio-heat equation described laser-tissue interaction in porcine and human eyes, simulating the surgery conditions. The modeled behavior of the superficial cornea temperature was compared with direct measurements performed by an infrared thermo-camera. The results indicated a selective, spatially-confined ...
N. Bianco, O. Manca, and D. Ricci
Università degli Studi di Napoli
A numerical analysis of the conjugate optical-thermal fields in an amorphous silicon thin film deposited on a glass substrate and irradiated by a moving Gaussian laser source is carried out. The combined optical and thermal models are solved by means of COMSOL Multiphysics. Results are given for continuous and pulsed moving Gaussian heat sources and they are presented as temperature ...
Numerical Simulation of the Heat Transfer and Elastic Dynamics of Nanodisk Arrays in Pump-Probe Laser Experiments
B. Revaz[1,2], C. Giannetti, F. Banfi, M. Montagnese, G. Ferrini, and F. Parmigiani[3,4]
 University of Geneva, Switzerland
 Università Cattolica del Sacro Cuore, Brescia
 Università degli Studi di Trieste
Sincrotrone Trieste, I-34012 Basovizza, Trieste
We present in this paper, numerical simulations of the heat transfer and elastic dynamics of permalloy nanodisks on crystalline Si. The goal of this work is to simulate recent pump-probe laser experimental results obtained in our laboratory.
Finite Element Analysis of Electro-mechanical Deflection of Cantilevers for SPM and MEMS Applications
D. Moro, and G. Valdrè
University of Bologna
The understanding of the distribution of electrostatic forces at the nanoscale is of fundamental importance for the development of nanotechnology. In this work, in order to quantify the EFM cantilever/tip-sample interaction, we present a 3D static Finite Element Analysis of the electromechanical interaction between conductive probes and samples, using COMSOL Multiphysics. The simulation ...