Model Gallery

The Model Gallery features COMSOL Multiphysics model files from a wide variety of application areas including the electrical, mechanical, fluid, and chemical disciplines. You can download ready-to-use models and step-by-step instructions for building the model, and use these as a starting point for your own modeling work. Use the Quick Search to find models relevant to your area of expertise, and login or create a COMSOL Access account that is associated with a valid COMSOL license to download the model files.

Transient elastohydrodynamic squeeze film interaction

This benchmark model computes the transient pressure distribution and film height in a squeeze film bearing for lubrication in a nonconformal conjunction of a solid sphere and an elastic wall separated by a lubricant film. This model solves the benchmark case of hydrodynamic interaction between a solid sphere and a wall separated by a lubricant film, and extends the benchmark case to include ...

Inclined Screen

This model simulates the flow through a uniform inclined screen using the Screen feature in Single-Phase Flow physics and compares the results with an analytic solution.

1D Step Bearing

This benchmark model computes the load-carrying capacity of a one dimensional hydrodynamic step bearing. The results are compared with analytic expressions obtained by solving the Reynolds equations directly in this simple case.

Diverging Duct

When the diameter of a pipe suddenly increases, the area available for flow increases. Fluid with relatively high velocity will decelerate into a relatively slow moving fluid. Depending on the Reynolds number, this can cause turbulence and much of the excess in kinetic energy is converted into heat and therefore wasted. If the change of the cross-section is gradual, the kinetic energy can be ...

Journal Bearing with Cavitation

A journal bearing is composed of an outer cylinder (bearing) wrapped around an inner rotating journal (shaft), with a lubricant separating the two. Under certain operating conditions, cavitation can occur between the bearing and the journal, leading to component damage and failure. Knowing the rate of cavitation is helpful when determining the maximum applied load. Cavitation occurs when the ...

Quick Search

41 - 45 of 45 First | < Previous | Next > | Last